When you receive your Magic Pro package, you will find the following items:
a PEMF Mat, a Main Unit, a Storage Bag, an Audio Cable, a Power Adapter, a Coil Tester, and a User Manual.
How to Use Magic Pro?
Step 1: Connect the power cord into the adapter.
Step 2: Insert the small round power adapter plug into the main unit.
Step 3: Plug the mat into the main unit.
Step 4: Plug the power adapter into a mains power source.
Step 5: Press the power button for 2 seconds to turn on Magic Pro. The light should turn on.
Step 6: Send audio to Magic Pro using any Bluetooth device, or directly via the cable.
To help you get started with Magic Pro, we have composed 4 special healing frequencies. You can click HERE for more details.
Note: You may choose your own sound source. When playing, the top light may blink.
Step 7: Lie on the mat for at least 30 minutes every day. There is no maximum time limit.
When you finish, press the power button for 2 seconds to turn off Magic Pro.
Note: The magnetic signals from Magic Pro are inaudible. You can confirm everything is running correctly by placing the coil tester near or on the mat while the audio is playing. You will hear the audio from the earplug.
When you receive your Big Magic package, you will find the following items:
a portable storage bag, a Big Magic main unit, a 5v power adapter, a USB power cable, a PEMF mat, a coil tester, and a user manual.
How to Use MiraMate Big Magic?
Step 1: Connect to Power
Plug the USB power cable provided (or a regular USB cable) into Big Magic. Plug the other end of the cable into a USB port.
Step 2: Connect the Mat
Plug the PEMF mat into Big Magic main unit. Make sure the plug key matches the groove in the socket.
Step 3: Turn on and Adjust Power
Use the power level switch to adjust the power level. We recommend level two, but if you are sensitive to magnetic fields, you can set it to level one.
Use the power switch to turn on Big Magic. The power indication light illuminates when Big Magic is connected to power and switched on. Another indication light flashes during treatment. The top ‘breathing light’ can be toggled on and off using the breathing light button.
Step 4: Test Functionality
Use the coil tester to check the functionality of Big Magic. Place the coil tester on the PEMF mat. Flashing indicates a magnetic field is present. You may need to reposition the tester until it lights.
Step 5: Begin Treatment
Place the mat under the area you wish to apply PEMF treatments. The suggested treatment time is 3-hours or more session per day. For overnight treatments, place the PEMF mat under your bed sheet.
Quick Links:
Big Magic User Manual
When you receive your Mini Magic package, you will find the following items:
a Mini Magic main unit, a pair of single coil, a 5v power adapter, a USB power cable, a small wrist band, a coil tester, and a user manual, and a pair of quad coils (if purchased).
How to Use Mini Magic?
Step 1: Connect to Power
Connect Mini Magic to power using either the provided USB cable and 5V power adapter or a ZNTER 9V Lithium Battery (recommended battery bank: Anker PowerCore 10000). If using the battery, gently press the tab and lift the lid to insert the battery with the positive terminal on the right side. Close and secure the lid without using excessive force.
Step 2: Connect the Single Coils or Quad Coils
Plug the single or quad coils into the socket on the side of Mini Magic, ensuring that the wire is fully inserted.
Step 3: Turn on and Adjust Power
Turn on Mini Magic using the switch located on the right side. The light will blink.
Adjust the power level using the front 3-position rotary switch. We recommend level three, but if you are sensitive to magnetic fields, you can set it to level one.
Step 4: Test Functionality
Test Mini Magic’s functionality by placing the coil tester over the top of the core. The red light should flash regularly during operation.
Step 5: Begin Treatment
Unwrap the coils from Mini Magi and position them where you wish to apply healing magnetic fields. Position the coils with the smooth side touching your skin. Use the wristband or elastic bandage to secure the coils in place. The suggested treatment time is a 1.5-hour session per day.
Quick Links:
Mini Magic User Manual
When you receive your Ray Gun package, you will find the following items:
A Ray Gun main unit, a gas tube, a pair of goggles, ten earthing pads, a earthing cable,a 5v power adapter, and a user manual.
How to use Ray Gun？
Step 1: Fully Insert the Gas Tube
Carefully insert the gas tube into the Ray Gun hit until it is fully inserted. Be cautious during this process as the gas tube is fragile and can break easily if too much force is applied.
Step 2: Connect to Power
Connect the power adapter to the Ray Gun power socket, and then plug the other end of the power adapter into a mains power source. The LED light in the handle will illuminate when the Ray Gun receives power. Remember to wear the included UV protective glasses before using the Ray Gun.
Step 3: Start Treatment
Place the troop directly on the problem area and gently press the trigger for the desired treatment duration. You will hear a high pitched buzzing noise, release the trigger to stop the treatment. It is recommended to use Ray Gun for 2 minutes (no more than 5 minutes) on each session area once or twice a day.
Note:
There are three modes of Ray Gun: contact mode, angle mode and penetration mode.
Quick links:
Ray Gun User Maunual
Join our Facebook community to connect with other like-minded people, stay up-to-date on our latest news, and get exclusive access to valuable content, discussions, and events. Click HERE to Join in.
We are offering regular online training courses to help you learn how to use our products effectively. Click HERE to learn more details if you’re interested.
